Sprout3D

In stock
SKU
Sprout3D
  • Overview


    The Surestep Sprout3D™ Cranial Remolding Orthosis (CRO) is transforming cranial care with a cutting-edge 3D design that delivers precision, comfort, and efficiency.

    Developed by leading cranial specialists, Sprout3D leverages over 10,000 data points, decades of expertise, and extensive 3D fabrication resources to ensure the best possible patient outcomes.

  • Indications


    Deformational Plagiocephaly

    Deformational Brachycephaly

    Asymmetric Brachycephaly

    Deformational Scaphocephaly

  • Product Specifications


    3D Printed from PA12 Nylon Filament

    MP33 Liner - ¼ in

    Superior Opening Options: Plagiocephaly (Right or Left), Brachycephaly, Standard (85 mm)

    Color Options: Black, Blue, Purple, Light Grey

  • Scanning


    Equipment: White light scanner - .aop, .med, and .stl files accepted*

    Capture with your choice of stockinette

    Ears and face must be cutout of stockinette for the scan

    Ensure accurate capture of occipital and mastoid area. If you question the accuracy of your scan, we recommend trying it again to be safe!

     

    * Please Note: Surestep cannot accept scans from a tablet or cell phone-based scanners, as they do not output scans to the degree of accuracy needed for fabrication. Contact Surestep with specific questions

  • Modifications


    We offer several modification options to allow clinicians to design the Sprout3D to best treat each patient. However, the Sprout3D is a more standardized device due to the manufacturing process and rigidity of the plastic. If customization is required beyond what we offer in the ordering portal, we recommend exploring traditional thermoplastic options.

    Plagio Mod Options:

    Standard – Up to 2 cm of symmetrical build, modify cranial shape to full symmetry (no less than 1 cm, no more than 2 cm)

    Growth Chart – Recommended for 8-10 month old age range (not for infants less than 6 months old), use age and starting circumference of patient, follow corresponding growth to add 4 months of age (treatment time)

    Posterior Only – Up to 2 cm of symmetrical build, utilized for Infants with no frontal involvement (or no void space desired)

    Brachy Mod Options:

    Standard - Hold width of cranium and adjust posterior, modify cranial shape to full symmetry (no less than 1 cm, no more than 2 cm)

    Focus on Symmetry – Void first utilized on TDD/asymmetry, remaining void (up to 2 cm) used on CI/disproportion

    Focus on Proportion – Void utilized on CI/disproportion, TDD not accounted for

The Surestep Sprout3D™ Cranial Remolding Orthosis (CRO) is transforming cranial care with a cutting-edge 3D design that delivers precision, comfort, and e...
Supplier: FOOTSTEPS LLC
Availability:
$550.99
Product Overview

The Surestep Sprout3D™ Cranial Remolding Orthosis (CRO) is transforming cranial care with a cutting-edge 3D design that delivers precision, comfort, and efficiency.

Developed by leading cranial specialists, Sprout3D leverages over 10,000 data points, decades of expertise, and extensive 3D fabrication resources to ensure the best possible patient outcomes.

Indications

  • Deformational Plagiocephaly
  • Deformational Brachycephaly
  • Asymmetric Brachycephaly
  • Deformational Scaphocephaly

Product Specifications

  • 3D Printed from PA12 Nylon Filament
  • MP33 Liner - ¼in
  • Superior Opening Options: Plagiocephaly (Right or Left), Brachycephaly, Standard (85 mm)
  • Color Options: Black, Blue, Purple, Light Grey

Scanning

  • Equipment: White light scanner - .aop, .med, and .stl files accepted*
  • Capture with your choice of stockinette
  • Ears and face must be cutout of stockinette for the scan
  • Ensure accurate capture of occipital and mastoid area. If you question the accuracy of your scan, we recommend trying it again to be safe!

* Please Note: Surestep cannot accept scans from a tablet or cell phone-based scanners, as they do not output scans to the degree of accuracy needed for fabrication ▪ Contact Surestep with specific questions


Modifications

We offer several modification options to allow clinicians to design the Sprout3D to best treat each patient. However, the Sprout3D is a more standardized device due to the manufacturing process and rigidity of the plastic. If customization is required beyond what we offer in the ordering portal, we recommend exploring traditional thermoplastic options.

Plagio Mod Options:

  • Standard – Up to 2 cm of symmetrical build, modify cranial shape to full symmetry (no less than 1 cm, no more than 2 cm)
  • Growth Chart – Recommended for 8-10 month old age range (not for infants less than 6 months old), use age and starting circumference of patient, follow corresponding growth to add 4 months of age (treatment time)
  • Posterior Only – Up to 2 cm of symmetrical build, utilized for Infants with no frontal involvement (or no void space desired)

Brachy Mod Options:

  • Standard - Hold width of cranium and adjust posterior, modify cranial shape to full symmetry (no less than 1 cm, no more than 2 cm)
  • Focus on Symmetry – Void first utilized on TDD/asymmetry, remaining void (up to 2 cm) used on CI/disproportion
  • Focus on Proportion – Void utilized on CI/disproportion, TDD not accounted for

Clinician Resources

Product Flyer

More Info

Parent Resources

Wear and Care Brochure

Specifications
360 View Thumbnail no_selection
Video Thumbnail no_selection
Typically in Stock No
Write Your Own Review
Only registered users can write reviews. Please log in or register